Good night all those bastards, back again in my post this time about the wiring! I relate this afternoon just making cable again make at home, yes fitting also for at the time of this post in your blog. Okay, this time not too long a story yes, what else I'm not eager to talk long with punks like you all to do this long enough to be posted. Previously, I will introduce the first tools and usefulness. As the picture below!
UTP cable: conductive media for the network
RJ45 Connector (bit not shown): as a liaison between UTP cable.
Crimping pliers: serves to strengthen the cable (for crimping cable)
Cigarettes: this for my daily consumption pal (release of fatigue)
LAN Tester: to do the testing LAN cable (sorry, I do not have)
Okay, I have explained the functions of our equipment this time, if there are not clear, I suggest you refer to GOOGLE it! previous I will give you an idea in advance for cable manufacture CROSS this tutorial! scheme like this!
RJ45 Connector (bit not shown): as a liaison between UTP cable.
Crimping pliers: serves to strengthen the cable (for crimping cable)
Cigarettes: this for my daily consumption pal (release of fatigue)
LAN Tester: to do the testing LAN cable (sorry, I do not have)
Okay, I have explained the functions of our equipment this time, if there are not clear, I suggest you refer to GOOGLE it! previous I will give you an idea in advance for cable manufacture CROSS this tutorial! scheme like this!
Okay, early stage cut ends of UTP cable first, and the separation between different colors as shown below!
well, after you cut the ends of the cable and you have make like this, go back to the previous image, if the first end of the cable to form the scheme as shown below,
then, the second tip would be different colors! supposed to be like this picture taken!
so, the next step is to sort out the cable until the neat and not messy! because, if the cable mess, will affect the connection! serial cable so as to form the image below!
then, align the cable end with evenly as possible because, if the cable mess like this, there will be a failure in the connection! averaged cable using crimping pliers as shown below!
after you flatten the cable so the next step, insert the cable into the connector with flat until about the end of the pin! as shown below!
after you insert the cable that connector until all the colors of the wires touch the tip of the pin to the right, then the next step is the one connector with crimp crimping pliers until the passage reads a little like! see the image below!
after you crimp wired properly, be the first stage in the manufacture of cables! so we will move on to testing the cable to the network! cable is ready made, as shown below!
Well, the cables are finished in for! This was the stage finished wiring! if you have a LAN Tester, then you can test it with the LAN TESTER! I do not have the associated LAN TESTER, then I do the testing wires by hand and directly to the computer, so the tutorial of my thank you! And do not forget to learn pal! Because science is very meaningful than not knowledgeable!