TCP / IP divides each task ranging from package delivery to receipt of packets in the system so that if a problem occurs, the problem can be solved well. Based on the transmission of data packets, routing can be divided into two direct routing and routing indirectly.
Direct routing is an addressing directly without having to continue to address, or another host. Examples such as address or host 192.168.1.4 wants to send a packet of data or information to the address 192.168.1.5 without having to go through a lengthy process as a redirect to another address or host.
Indirect Routing is an indirect addressing and must go through a host of others such as eg 192.168.1.4 address or host wants to send data or information to the address or host 192.168.1.5 and the package does not directly sent to the direction of the host address, but must go through a host 192.168.1.6. This is just an example, you dapatmengambil other examples.
Type Configuration Routing
Type configure a routing is divided into three parts, namely a minimum of routing, static routing and dynamic routing. Minimal routing routing is simple and usually only found on the local network. Static routing is a routing that is built with a lot of gateways. This type of network only supports the small and stable. Dynamic routing is a routing that is typically used on a network that has many or more than one route. Dynamic routing requires a routing protocol to create routing tables that can take a computer resource.
